Face Shield RC2 Lite - verze s folií 300 micronů (0.4 mm noozle)
Verze vychází z designu Prusa Research RC2. Tato verze je oproti RC2 snížená na 15 mm výšky. Všechny ostatní rozměry jsou zachovány. Doporučujeme použít s fólií 0.2 - 0.3 mm. Doporučujeme fólii zacvaknout piny.
The version is based on the Prusa Research RC2 design. This version is reduced to 15 mm height compared to RC2. All other dimensions are retained. We recommend using 0.2 - 0.3 mm foil. We recommend that the foil be snapped into place.
Aktuální informace o dezinfekci: www.prusa3d.cz/covid19
Face Shield RC2 Lite - manufactured / donated - 421 kits / Support us
Všechny štíty vyrábíme za své náklady. Všechny štíty jsou rozdávány zcela zdarma. V případě, že by jste nás ale chtěli podpořit, můžete zde. Všichni již obdarovaní příjemci jsou dole na stránce.
We produce all shields at our expense. All shields are distributed free of charge. However, if you would like to support us, please click here. All recipients already donated are at the bottom of the page.
Face Shield RC2 Lite Verze s folií 300 micronů (0.4 mm noozle)

All in one
STL Files
Gcodes for Ender 3 Pro - PLA preset
Foil template A4 PDF
Manual A4 PDF
1 x Face Shield RC2 Lite HEAD

Recommended print settings
Layer: 0.4 mm
Extrusion multiplier: 1.2
Shells: 2
Infill: 100%
Raft: No
Supports: No
Brim: No
4 x Face Shield RC2 Lite HEAD

Recommended print settings
Layer: 0.4 mm
Extrusion multiplier: 1.2
Shells: 2
Infill: 100%
Raft: No
Supports: No
Brim: No
15 x Face Shield RC2 Lite HEAD

Recommended print settings
Layer: 0.4 mm
Extrusion multiplier: 1.2
Shells: 2
Infill: 100%
Raft: No
Supports: No
Brim: No
1x Face Shield RC2 Lite PIN

Recommended print settings
Layer: 0.4 mm
Extrusion multiplier: 1.2
Shells: 2
Infill: 100%
Raft: No
Supports: No
Brim: No
54 x Face Shield RC2 Lite PIN

Recommended print settings
Layer: 0.4 mm
Extrusion multiplier: 1.2
Shells: 2
Infill: 100%
Raft: No
Supports: No
Brim: Yes
Face Shield RC2 Lite FOIL TEMPLATE

Recommended print settings
Paper: A4
Scale: 100%
Final width after print should be 24 cm.
Face Shield RC2 Lite MANUAL

Paper: A4
Assembly guide + Sterilisation instructions.
Face Shield - UNIVERSAL MANUAL (community modifinations)
Paper: A4
Assembly guide + Sterilisation instructions.
Face Shield RC2 Lite - verze s folií 300 micronů

